0.1 micron-1 micron PP filter cartridge
PP cartridge element characteristics:
s Anti-acid and anti-alkali
s There will be not any material fall off
s Low pressure difference
s High filter precision, adaptable to many industries
s Big chemical compatibility and dirt filtration volume
s Must 100% integrity test
s Big flow rate
s Long lifetime, easy to exchange, short exchange time
s Meeting FDA food security requirement after cleaning by pure water
s There is not any adhesive
s Electronic resistivity could reach 18MΩ after cleaning by high pure water, meeting electronic industry requirement
Disadvantages : The working pressure has to be less than 0.3Mpa;
Solids will be easy to pass, especially when temperature is higher than 60℃;
Back flushing is not so well.
The general filter element joint type:
Pure water flow capacity reference chart(10〃Initial value L/min ,△P=0.01Mpa,1cP,25℃)
Precision(um)
|
0.1
|
0,2
|
0.45
|
0.65
|
1
|
3
|
5
|
10
|
20
|
30
|
60
|
Flow rate(L/min))
|
5
|
15
|
40
|
55
|
60
|
65
|
67
|
70
|
75
|
78
|
80
|
Dimensions:
OD: Φ68、Φ69mm
ID: Φ33mm
Length: 2.5’’-40’’
Precision: 0.10 ,0.20 ,0.45 ,1.00 ,3.00 ,5.00 ,10.0 ,20.0 ,40.0 ,50.0
Filtering area: ≥0.65m²/10’’
Sealing material: silicone rubber VMQ, NBR, EPDM, FPM
Sealing method: thermally welded
Working condition:
PH: 1~13
Normal working temp. ≤55℃,△P≤0.10Mpa
Maximum working temperature: 80℃
Maximum pressure difference: 25℃,forwards 0.42Mpa,reverse 0.21MPa
Sterilization: 121±2℃30min/time or sterilization cabinet 30min/次
Releasing components: endotoxin <0.25EU/ml,extractive<0.03g/10"element
filter cartridge
filter cartridge